Part No.:
20154 (replaced by 29086)
Commercial Name:
Schrader Snap-in GEN4 Type 433MHz GM
OEM Sensor P/N:
22853740, 13581561; 1805BA0131N; 20922901; 22853740; 25789964; 25809220; 25880395; TP3040001
Ean Code:
5054208000251
EZ-sensor® coverage:
YES
Nut Torque:
-- Nm
Screw Torque:
11.5 in-lbs (1.3 Nm) Nm
Valve Core Torque:
3.5 in-lbs (0.4 Nm) Nm
Note:
(A)=42.7 mm; (B)=Type 1
WARNING: This product contains chemicals including lead, which is known to the State of California to cause cancer and reproductive issues.
For more information, go to
www.P65Warnings.ca.gov.
EZ-sensor® GO is pre-programmed for all vehicles mentioned in the list. No programming is required before installation for the below applications. Additionally, the sensor can be programmed to 99% of all vehicle makes, models and years.
Click on item for more details:
This list is being continuously updated.
Part No.:
1095
20018
20018
Commercial Name:
EZ-sensor Service Pack - Rubber Valve Assembly
Note:
20018 replaces 20008
Contents: 1 Rubber Valve Stem assembled with Plastic sealing cap and Valve Core, 1 Stainless Steel Attachment Screw,
Part No.:
1530
34000
34000
Commercial Name:
Schrader Service Pack - Aluminum Valve
Note:
Contents: 1 Aluminum Valve Stem, 1 Aluminum Nut, 1 Rubber Grommet, 1 Plastic Sealing Cap, 1 Nickel Plated Valve Core, 1 Stainless Steel Attachment Screw
EZ-sensor® GO can be programmed to any Make Model and Year shown in this list.
Click on item for more details:
This list is being continuously updated.
Relearn Summary: Stationary Relearn
Relearn Description1. With standard ignition, turn key to ON position, engine off. With push button start, start engine.
2. Using the arrow pad on right-hand side of the steering wheel, press the right arrow to access the vehicle INFO menu.
3. Scroll up or down until the vehicle’s tire pressure is displayed. NOTE: If the vehicle’s tire pressure is not displayed, then proceed to the SETTINGS menu, highlight Display Tire Pressure, and press the select button in the center of the arrow pad.
4. Press and hold the select button in the center of the arrow pad. The horn will sound indicating the vehicle is now in learn mode.
5. Using a TPMS activation tool, activate the sensors in the following order: LF, RF, RR, and LR. Horn will sound twice after successfully activating all sensors.
Relearn Procedure as PDF document
Mounting Instructions
Note:
Sensor images shown in this document are for illustration purpose only!
Phisical sensor body may be different.
Non contractual document!
For tecnical information, please contact your supplier or leave a message at info@Schrader TPMS E-Catalog.com
User Manual/Quick Start Guide
Note:
Document contains full description user manual and / or Quick Start Guide. Non contractual document!
For technical information, please contact your supplier or leave a message at SchraderNA@sensata.com
Approvals and Declarations
Note:
Package contains FCC, IC and CE certifications
Physical sensor body may be different.
Other documents can be also found
here.