SHOPPING CART

GMC Sierra HD
2000-10/2004-12

OEM Products

OE Ref.: 
15136883
15136883
  Schrader Clamp-in Gen J 315MHz GM 51psi

Schrader Clamp-in Gen J 315MHz GM 51psi
Please contact your Schrader Sales Rep or your Schrader TPMS distributor for pricing and availability. Product displayed for reference only, service kits might be available Click here to order
OE Ref.: 15136883
Commercial Name: Schrader Clamp-in Gen J 315MHz GM 51psi
EZ-sensor® coverage: YES
Nut Torque: 62 in-lbs (7 Nm) Nm
Screw Torque: -- Nm
Valve Core Torque: 3.5 in-lbs (0.4 Nm) Nm
Note:  
 
  WARNING: This product contains chemicals including lead, which is known to the State of California to cause cancer and reproductive issues.
For more information, go to www.P65Warnings.ca.gov.

EZ-sensor® GO is pre-programmed for all vehicles mentioned in the list. No programming is required before installation for the below applications. Additionally, the sensor can be programmed to 99% of all vehicle makes, models and years.

Click on item for more details:

This list is being continuously updated.

Part No.: 20004
Commercial Name: TPMS Service Pack
Note:

20004 replaces 20002 going forward from March 1, 2018

Contents: 1 Aluminum Nut, 1 Plastic Sealing Cap, 1 Rubber Grommet, 1 Nickel Plated Valve Core

99.99 € */each
Product displayed for reference only, service kits might be available Click here to order
Relearn Summary:  Stationary Relearn
Relearn Description

NOTE: If vehicle has an arrow pad located on the steering wheel, proceed to SCH-GM-22 WITH STANDARD IGNITION: NOTE: On some models, the turn signal will not illuminate once learn mode is active. 
1. Turn the ignition to the ON/RUN position (engine off). 
2. Using keyless entry system: press and hold lock and unlock buttons simultaneously until horn sounds, and then LF turn signal will become illuminated to indicate learn mode enabled. Or using the DIC, press and release INFO button until TIRE LEARN message is indicated on display. Hold down SET/RESET button until horn sounds, LF turn signal is illuminated to indicate learn mode enabled. 
3. Starting at the LF tire, use TPMS activation tool to activate sensor, once the vehicle receives the signal from the sensor, the horn will chirp. 
4. After horn sounds, proceed as in step 3 for the next 3 sensors in the following order: RF, RR, LR. 
5. After LR sensor has been learned, turn ignition to OFF position. Adjust all tires to pressure listed on tire placard. Step one: press and hold the push button start until the vehicle is in accessary mode. Note: on Cadillac models you will know when you are in accessary mode when the Cadillac emblem appears on the DIC. NOTE: If Keyless entry system does not place vehicle into learn mode see SCH-GM-21/22 WITH PUSH-BUTTON START: NOTE: On some models, the turn signal will not illuminate once learn mode is active. 1. Press and hold the push button start until the vehicle is in accessary mode. Note: on Cadillac models you will know when you are in accessary mode when the Cadillac emblem appears on the DIC. 2. Press the MENU button located on the turn signal lever until “VEHICLE INFORMATION MENU” is displayed. 3. Once you are in the VEHICLE INFORMATION MENU, use the on the turn signal lever until the DIC displays the vehicle’s tire inflation pressures and positions. 4. Press and hold the button located on the end of the turn signal lever until “Are you sure that you want to relearn? YES or NO” is displayed. 5. Use the on the turn signal lever to highlight YES. Once YES is highlighted, press the button located on the end of the turn signal lever. The horn will chirp, “Tire Learning Active” will be displayed on the DIC, and the left front turn signal will be illuminated. 
6. Beginning with the left front tire, use a TPMS activation tool to activate the left front sensor. Once the sensor has been activated, the horn will chirp and the right front turn signal will be illuminated. Repeat procedure in following order, right front sensor, right rear sensor, and finally the left rear sensor. Once the left rear sensor has been activated, the horn will chirp twice. You can then turn the vehicle off to exit “learn mode.” • Troubleshooting Tip: On many vehicles, the option to relearn the TPMS by accessing the DIC will not work. Be sure to obtain keyless entry transmitter from customer, or some scan tools have the ability to place the vehicle into learn mode or write IDs via an OBDII connection.

Mounting Instructions
Note:
Sensor images shown in this document are for illustration purpose only!
Phisical sensor body may be different.
Non contractual document!
For tecnical information, please contact your supplier or leave a message at info@Schrader TPMS E-Catalog.com
User Manual/Quick Start Guide
Note:
Document contains full description user manual and / or Quick Start Guide. Non contractual document!
For technical information, please contact your supplier or leave a message at SchraderNA@sensata.com
Approvals and Declarations
Note:
Package contains FCC, IC and CE certifications
Physical sensor body may be different.
Other documents can be also found here.

Aftermarket Sensor

Part No.  
29179
29179
  Schrader Aluminium Clamp-in Variable Angle 315MHz Sensor for GM Applications

Part No.: 29179
Commercial Name: Schrader Aluminium Clamp-in Variable Angle 315MHz Sensor for GM Applications
OEM Sensor P/N:
EZ-sensor® coverage: YES
Nut Torque: 62 in-lbs (7 Nm) Nm
Screw Torque: -- Nm
Valve Core Torque: 3.5 in-lbs (0.4 Nm) Nm
Note:  
 

EZ-sensor® GO is pre-programmed for all vehicles mentioned in the list. No programming is required before installation for the below applications. Additionally, the sensor can be programmed to 99% of all vehicle makes, models and years.

Click on item for more details:

This list is being continuously updated.

Part No.: 20004
Commercial Name: TPMS Service Pack
Note:

20004 replaces 20002 going forward from March 1, 2018

Contents: 1 Aluminum Nut, 1 Plastic Sealing Cap, 1 Rubber Grommet, 1 Nickel Plated Valve Core

99.99 € */each
Product displayed for reference only, service kits might be available Click here to order
Relearn Summary:  
Relearn Description
Relearn Procedure as PDF document
Mounting Instructions
Note:
Sensor images shown in this document are for illustration purpose only!
Phisical sensor body may be different.
Non contractual document!
For tecnical information, please contact your supplier or leave a message at info@Schrader TPMS E-Catalog.com
User Manual/Quick Start Guide
Note:
Document contains full description user manual and / or Quick Start Guide. Non contractual document!
For technical information, please contact your supplier or leave a message at SchraderNA@sensata.com
Approvals and Declarations
Note:
Package contains FCC, IC and CE certifications
Physical sensor body may be different.
Other documents can be also found here.

Service Kits

Part No.  
20004
20004
  TPMS Service Pack

Part No.: 20004
Commercial Name: TPMS Service Pack
Note:

20004 replaces 20002 going forward from March 1, 2018

Contents: 1 Aluminum Nut, 1 Plastic Sealing Cap, 1 Rubber Grommet, 1 Nickel Plated Valve Core

 
 
  WARNING: This product contains chemicals including lead, which is known to the State of California to cause cancer and reproductive issues.
For more information, go to www.P65Warnings.ca.gov.

EZ-sensor® GO is pre-programmed for all vehicles mentioned in the list. No programming is required before installation for the below applications. Additionally, the sensor can be programmed to 99% of all vehicle makes, models and years.

Click on item for more details:

This list is being continuously updated.

EZ-sensor® GO can be programmed to any Make Model and Year shown in this list.

Click on item for more details:

This list is being continuously updated.

Relearn Summary:  
Relearn Description
Relearn Procedure as PDF document
Mounting Instructions
Note:
Sensor images shown in this document are for illustration purpose only!
Phisical sensor body may be different.
Non contractual document!
For tecnical information, please contact your supplier or leave a message at info@Schrader TPMS E-Catalog.com
User Manual/Quick Start Guide
Note:
Document contains full description user manual and / or Quick Start Guide. Non contractual document!
For technical information, please contact your supplier or leave a message at SchraderNA@sensata.com
Approvals and Declarations
Note:
Package contains FCC, IC and CE certifications
Physical sensor body may be different.
Other documents can be also found here.

Programmable Sensor

Part No.  
33500
33500
  Schrader Snap-in Programmable EZ-Sensor 314.9 MHz / 315Mhz / 433MHz

Part No.: 33500
Commercial Name: Schrader Snap-in Programmable EZ-Sensor 314.9 MHz / 315Mhz / 433MHz
OEM Sensor P/N:
Ean Code: 651001215971
Nut Torque: -- Nm
Screw Torque: 11.5 in-lbs (1.3 Nm) Nm
Valve Core Torque: 3.5 in-lbs (0.4 Nm) Nm
Note:

EZ-sensor must be programmed prior to installation and relearned to the vehicle. A Programming Tool compatible with EZ-sensor is required. For maximum coverage, ensure your TPMS tool is updated to the latest software available.

(A)=45.4 mm; (B)=Type 3

 

NOTE : the transmission frequency of 315 MHz is not admissible in the EU

 
 
  WARNING: This product contains chemicals including lead, which is known to the State of California to cause cancer and reproductive issues.
For more information, go to www.P65Warnings.ca.gov.

EZ-sensor® GO is pre-programmed for all vehicles mentioned in the list. No programming is required before installation for the below applications. Additionally, the sensor can be programmed to 99% of all vehicle makes, models and years.

Click on item for more details:

This list is being continuously updated.

Part No.: 20018
Commercial Name: EZ-sensor Service Pack - Rubber Valve Assembly
Note:

20018 replaces 20008

Contents: 1 Rubber Valve Stem assembled with Plastic sealing cap and Valve Core, 1 Stainless Steel Attachment Screw,

99.99 € */each
Product displayed for reference only, service kits might be available Click here to order
Part No.: 34000
Commercial Name: Schrader Service Pack - Aluminum Valve
Note:

Contents: 1 Aluminum Valve Stem, 1 Aluminum Nut, 1 Rubber Grommet, 1 Plastic Sealing Cap, 1 Nickel Plated Valve Core, 1 Stainless Steel Attachment Screw

99.99 € */each
Product displayed for reference only, service kits might be available Click here to order
Part No.: 34010
Commercial Name: Schrader Service Kit - Black Anodized Aluminum Valve
Note:

Contents: 1 Black Anodized Aluminum Valve Stem, 1 Black Anodized Aluminum Nut, 1 Rubber Grommet, 1 Black Plastic Sealing Cap, 1 Nickel Plated Valve Core, 1 Stainless Steel Attachment Screw

99.99 € */each
Product displayed for reference only, service kits might be available Click here to order

EZ-sensor® GO can be programmed to any Make Model and Year shown in this list.

Click on item for more details:

This list is being continuously updated.

Relearn Summary:  
Relearn Description
Relearn Procedure as PDF document
Mounting Instructions
Note:
Sensor images shown in this document are for illustration purpose only!
Phisical sensor body may be different.
Non contractual document!
For tecnical information, please contact your supplier or leave a message at info@Schrader TPMS E-Catalog.com
User Manual/Quick Start Guide
Note:
Document contains full description user manual and / or Quick Start Guide. Non contractual document!
For technical information, please contact your supplier or leave a message at SchraderNA@sensata.com
Approvals and Declarations
Note:
Package contains FCC, IC and CE certifications
Physical sensor body may be different.
Other documents can be also found here.

Part No.  
33700
33700
  Schrader Clamp-in Programmable EZ-sensor 314.9 MHz / 315Mhz / 433MHz

Part No.: 33700
Commercial Name: Schrader Clamp-in Programmable EZ-sensor 314.9 MHz / 315Mhz / 433MHz
OEM Sensor P/N:
Ean Code: 5054208007083
Nut Torque: 71 in-lbs (8 Nm) Nm
Screw Torque: -- Nm
Valve Core Torque: 3.5 in-lbs (0.4 Nm) Nm
Note:

EZ-sensor must be programmed prior to installation and relearned to the vehicle. A Programming Tool compatible with EZ-sensor is required. For maximum coverage, ensure your TPMS tool is updated to the latest software available.

 

NOTE : the transmission frequency of 315 MHz is not admissible in the EU

 
 
  WARNING: This product contains chemicals including lead, which is known to the State of California to cause cancer and reproductive issues.
For more information, go to www.P65Warnings.ca.gov.

EZ-sensor® GO is pre-programmed for all vehicles mentioned in the list. No programming is required before installation for the below applications. Additionally, the sensor can be programmed to 99% of all vehicle makes, models and years.

Click on item for more details:

This list is being continuously updated.

Part No.: 20049
Commercial Name: TPMS Service Pack - Schrader Adjustable Angle Aluminum Valve Kit - Mercedes
Note:

20049 replaces 20047

99.99 € */each
Product displayed for reference only, service kits might be available Click here to order

EZ-sensor® GO can be programmed to any Make Model and Year shown in this list.

Click on item for more details:

This list is being continuously updated.

Relearn Summary:  
Relearn Description
Relearn Procedure as PDF document
Mounting Instructions
Note:
Sensor images shown in this document are for illustration purpose only!
Phisical sensor body may be different.
Non contractual document!
For tecnical information, please contact your supplier or leave a message at info@Schrader TPMS E-Catalog.com
User Manual/Quick Start Guide
Note:
Document contains full description user manual and / or Quick Start Guide. Non contractual document!
For technical information, please contact your supplier or leave a message at SchraderNA@sensata.com
Approvals and Declarations
Note:
Package contains FCC, IC and CE certifications
Physical sensor body may be different.
Other documents can be also found here.