SHOPPING CART

Honda Civic
2005-10/2011-11

OEM Products

OE Ref.: 
42753-SNA-A83
42753-SNA-A83
  TRW Clamp-in Fixed Angle ver 1 Honda Acura 315MHz

TRW Clamp-in Fixed Angle ver 1 Honda Acura 315MHz
Please contact your Schrader Sales Rep or your Schrader TPMS distributor for pricing and availability. Product displayed for reference only, service kits might be available Click here to order
OE Ref.: 42753-SNA-A83
Commercial Name: TRW Clamp-in Fixed Angle ver 1 Honda Acura 315MHz
EZ-sensor® coverage: YES
Nut Torque: 35.4 in-lbs (4 Nm) Nm
Screw Torque: -- Nm
Valve Core Torque: 3.5 in-lbs (0.4 Nm) Nm
Note:  
 
  WARNING: This product contains chemicals including lead, which is known to the State of California to cause cancer and reproductive issues.
For more information, go to www.P65Warnings.ca.gov.

EZ-sensor® GO is pre-programmed for all vehicles mentioned in the list. No programming is required before installation for the below applications. Additionally, the sensor can be programmed to 99% of all vehicle makes, models and years.

Click on item for more details:

This list is being continuously updated.

Part No.: 20019
Commercial Name: TPMS Service Pack
Note:

Contents: 1 Aluminum Nut, 1 Plastic Sealing Cap, 1 Rubber Grommet, 1 Nickel Plated Valve Core, 1 Aluminum Washer

99.99 € */each
Product displayed for reference only, service kits might be available Click here to order
Relearn Summary:  Auto Relearn
Relearn Description

A properly formatted scan tool is required to learn new sensor IDs when replacing sensors. 
After sensor IDs are registered to vehicle, the MIL will flash until the vehicle is driven and the sensors IDs are received by the vehicle. 
This process could take 1-10 miles of continuous driving. 
TIA troubleshooting tip: For Model Year 2008 plus on the Civic, Fit, and Odyssey (non-touring): After registering the new sensor IDs to the vehicle via the OBDII, remove the valve core on the new sensor(s), allowing tire to complete deflate. 
Then inflate tire to operating air pressure, install valve core and verify correct air pressure with a calibrated air pressure gauge. 
While deflating tire(s) ensure vehicle weight is supported on a lift to avoid damage to the tire. 
By performing a rapid deflate/inflate in the new sensor(s) this enables the sensor(s) to fully activate and communicate with the vehicle. 
In some cases, the MIL will cease to flash after full deflation/ inflation, drive vehicle 1-10miles to get MIL to stop flashing if it does not stop after deflation/inflation.

Mounting Instructions
Note:
Sensor images shown in this document are for illustration purpose only!
Phisical sensor body may be different.
Non contractual document!
For tecnical information, please contact your supplier or leave a message at info@Schrader TPMS E-Catalog.com
User Manual/Quick Start Guide
Note:
Document contains full description user manual and / or Quick Start Guide. Non contractual document!
For technical information, please contact your supplier or leave a message at SchraderNA@sensata.com
Approvals and Declarations
Note:
Package contains FCC, IC and CE certifications
Physical sensor body may be different.
Other documents can be also found here.

Aftermarket Sensor

Part No.  
29098
29098
  Schrader Aluminium Clamp-in Variable Angle 315MHz Sensor for Honda Applications

Part No.: 29098
Commercial Name: Schrader Aluminium Clamp-in Variable Angle 315MHz Sensor for Honda Applications
OEM Sensor P/N: 42753-TR3-A81; 42753-SNA-A83; 42753-SNA-A84; 42753-TR0-A810-M1
EZ-sensor® coverage: YES
Nut Torque: 71 in-lbs (8 Nm) Nm
Screw Torque: -- Nm
Valve Core Torque: 3.5 in-lbs (0.4 Nm) Nm
Note:  
 
  WARNING: This product contains chemicals including lead, which is known to the State of California to cause cancer and reproductive issues.
For more information, go to www.P65Warnings.ca.gov.

EZ-sensor® GO is pre-programmed for all vehicles mentioned in the list. No programming is required before installation for the below applications. Additionally, the sensor can be programmed to 99% of all vehicle makes, models and years.

Click on item for more details:

This list is being continuously updated.

Part No.: 20049
Commercial Name: TPMS Service Pack - Schrader Adjustable Angle Aluminum Valve Kit - Mercedes
Note:

20049 replaces 20047

99.99 € */each
Product displayed for reference only, service kits might be available Click here to order
Relearn Summary:  
Relearn Description
Relearn Procedure as PDF document
Mounting Instructions
Note:
Sensor images shown in this document are for illustration purpose only!
Phisical sensor body may be different.
Non contractual document!
For tecnical information, please contact your supplier or leave a message at info@Schrader TPMS E-Catalog.com
User Manual/Quick Start Guide
Note:
Document contains full description user manual and / or Quick Start Guide. Non contractual document!
For technical information, please contact your supplier or leave a message at SchraderNA@sensata.com
Approvals and Declarations
Note:
Package contains FCC, IC and CE certifications
Physical sensor body may be different.
Other documents can be also found here.

Alternative Sensor

Part No.  
29098
29098
  Schrader Aluminium Clamp-in Variable Angle 315MHz Sensor for Honda Applications

Part No.: 29098
Commercial Name: Schrader Aluminium Clamp-in Variable Angle 315MHz Sensor for Honda Applications
OEM Sensor P/N: 42753-TR3-A81; 42753-SNA-A83; 42753-SNA-A84; 42753-TR0-A810-M1
EZ-sensor® coverage: YES
Nut Torque: 71 in-lbs (8 Nm) Nm
Screw Torque: -- Nm
Valve Core Torque: 3.5 in-lbs (0.4 Nm) Nm
Note:  
 
  WARNING: This product contains chemicals including lead, which is known to the State of California to cause cancer and reproductive issues.
For more information, go to www.P65Warnings.ca.gov.

EZ-sensor® GO is pre-programmed for all vehicles mentioned in the list. No programming is required before installation for the below applications. Additionally, the sensor can be programmed to 99% of all vehicle makes, models and years.

Click on item for more details:

This list is being continuously updated.

Part No.: 20049
Commercial Name: TPMS Service Pack - Schrader Adjustable Angle Aluminum Valve Kit - Mercedes
Note:

20049 replaces 20047

99.99 € */each
Product displayed for reference only, service kits might be available Click here to order
Relearn Summary:  
Relearn Description
Relearn Procedure as PDF document
Mounting Instructions
Note:
Sensor images shown in this document are for illustration purpose only!
Phisical sensor body may be different.
Non contractual document!
For tecnical information, please contact your supplier or leave a message at info@Schrader TPMS E-Catalog.com
User Manual/Quick Start Guide
Note:
Document contains full description user manual and / or Quick Start Guide. Non contractual document!
For technical information, please contact your supplier or leave a message at SchraderNA@sensata.com
Approvals and Declarations
Note:
Package contains FCC, IC and CE certifications
Physical sensor body may be different.
Other documents can be also found here.

Service Kits

Part No.  
20019
20019
  TPMS Service Pack

Part No.: 20019
Commercial Name: TPMS Service Pack
Note:

Contents: 1 Aluminum Nut, 1 Plastic Sealing Cap, 1 Rubber Grommet, 1 Nickel Plated Valve Core, 1 Aluminum Washer

 
 
  WARNING: This product contains chemicals including lead, which is known to the State of California to cause cancer and reproductive issues.
For more information, go to www.P65Warnings.ca.gov.

EZ-sensor® GO is pre-programmed for all vehicles mentioned in the list. No programming is required before installation for the below applications. Additionally, the sensor can be programmed to 99% of all vehicle makes, models and years.

Click on item for more details:

This list is being continuously updated.

Relearn Summary:  
Relearn Description
Relearn Procedure as PDF document
Mounting Instructions
Note:
Sensor images shown in this document are for illustration purpose only!
Phisical sensor body may be different.
Non contractual document!
For tecnical information, please contact your supplier or leave a message at info@Schrader TPMS E-Catalog.com
User Manual/Quick Start Guide
Note:
Document contains full description user manual and / or Quick Start Guide. Non contractual document!
For technical information, please contact your supplier or leave a message at SchraderNA@sensata.com
Approvals and Declarations
Note:
Package contains FCC, IC and CE certifications
Physical sensor body may be different.
Other documents can be also found here.

Programmable Sensor

Part No.  
33500
33500
  Schrader Snap-in Programmable EZ-Sensor 314.9 MHz / 315Mhz / 433MHz

Part No.: 33500
Commercial Name: Schrader Snap-in Programmable EZ-Sensor 314.9 MHz / 315Mhz / 433MHz
OEM Sensor P/N:
Ean Code: 651001215971
Nut Torque: -- Nm
Screw Torque: 11.5 in-lbs (1.3 Nm) Nm
Valve Core Torque: 3.5 in-lbs (0.4 Nm) Nm
Note:

EZ-sensor must be programmed prior to installation and relearned to the vehicle. A Programming Tool compatible with EZ-sensor is required. For maximum coverage, ensure your TPMS tool is updated to the latest software available.

(A)=45.4 mm; (B)=Type 3

 

NOTE : the transmission frequency of 315 MHz is not admissible in the EU

 
 
  WARNING: This product contains chemicals including lead, which is known to the State of California to cause cancer and reproductive issues.
For more information, go to www.P65Warnings.ca.gov.

EZ-sensor® GO is pre-programmed for all vehicles mentioned in the list. No programming is required before installation for the below applications. Additionally, the sensor can be programmed to 99% of all vehicle makes, models and years.

Click on item for more details:

This list is being continuously updated.

Part No.: 20018
Commercial Name: EZ-sensor Service Pack - Rubber Valve Assembly
Note:

20018 replaces 20008

Contents: 1 Rubber Valve Stem assembled with Plastic sealing cap and Valve Core, 1 Stainless Steel Attachment Screw,

99.99 € */each
Product displayed for reference only, service kits might be available Click here to order
Part No.: 34000
Commercial Name: Schrader Service Pack - Aluminum Valve
Note:

Contents: 1 Aluminum Valve Stem, 1 Aluminum Nut, 1 Rubber Grommet, 1 Plastic Sealing Cap, 1 Nickel Plated Valve Core, 1 Stainless Steel Attachment Screw

99.99 € */each
Product displayed for reference only, service kits might be available Click here to order
Part No.: 34010
Commercial Name: Schrader Service Kit - Black Anodized Aluminum Valve
Note:

Contents: 1 Black Anodized Aluminum Valve Stem, 1 Black Anodized Aluminum Nut, 1 Rubber Grommet, 1 Black Plastic Sealing Cap, 1 Nickel Plated Valve Core, 1 Stainless Steel Attachment Screw

99.99 € */each
Product displayed for reference only, service kits might be available Click here to order

EZ-sensor® GO can be programmed to any Make Model and Year shown in this list.

Click on item for more details:

This list is being continuously updated.

Relearn Summary:  
Relearn Description
Relearn Procedure as PDF document
Mounting Instructions
Note:
Sensor images shown in this document are for illustration purpose only!
Phisical sensor body may be different.
Non contractual document!
For tecnical information, please contact your supplier or leave a message at info@Schrader TPMS E-Catalog.com
User Manual/Quick Start Guide
Note:
Document contains full description user manual and / or Quick Start Guide. Non contractual document!
For technical information, please contact your supplier or leave a message at SchraderNA@sensata.com
Approvals and Declarations
Note:
Package contains FCC, IC and CE certifications
Physical sensor body may be different.
Other documents can be also found here.

Part No.  
33700
33700
  Schrader Clamp-in Programmable EZ-sensor 314.9 MHz / 315Mhz / 433MHz

Part No.: 33700
Commercial Name: Schrader Clamp-in Programmable EZ-sensor 314.9 MHz / 315Mhz / 433MHz
OEM Sensor P/N:
Ean Code: 5054208007083
Nut Torque: 71 in-lbs (8 Nm) Nm
Screw Torque: -- Nm
Valve Core Torque: 3.5 in-lbs (0.4 Nm) Nm
Note:

EZ-sensor must be programmed prior to installation and relearned to the vehicle. A Programming Tool compatible with EZ-sensor is required. For maximum coverage, ensure your TPMS tool is updated to the latest software available.

 

NOTE : the transmission frequency of 315 MHz is not admissible in the EU

 
 
  WARNING: This product contains chemicals including lead, which is known to the State of California to cause cancer and reproductive issues.
For more information, go to www.P65Warnings.ca.gov.

EZ-sensor® GO is pre-programmed for all vehicles mentioned in the list. No programming is required before installation for the below applications. Additionally, the sensor can be programmed to 99% of all vehicle makes, models and years.

Click on item for more details:

This list is being continuously updated.

Part No.: 20049
Commercial Name: TPMS Service Pack - Schrader Adjustable Angle Aluminum Valve Kit - Mercedes
Note:

20049 replaces 20047

99.99 € */each
Product displayed for reference only, service kits might be available Click here to order

EZ-sensor® GO can be programmed to any Make Model and Year shown in this list.

Click on item for more details:

This list is being continuously updated.

Relearn Summary:  
Relearn Description
Relearn Procedure as PDF document
Mounting Instructions
Note:
Sensor images shown in this document are for illustration purpose only!
Phisical sensor body may be different.
Non contractual document!
For tecnical information, please contact your supplier or leave a message at info@Schrader TPMS E-Catalog.com
User Manual/Quick Start Guide
Note:
Document contains full description user manual and / or Quick Start Guide. Non contractual document!
For technical information, please contact your supplier or leave a message at SchraderNA@sensata.com
Approvals and Declarations
Note:
Package contains FCC, IC and CE certifications
Physical sensor body may be different.
Other documents can be also found here.