SHOPPING CART

Toyota Land Cruiser
2008-01/2016-12

OEM Products

OE Ref.: 
42607-33011
42607-33011
  Pacific Clamp-in Gen2 315MHz Toyota FSK

Pacific Clamp-in Gen2 315MHz Toyota FSK
Please contact your Schrader Sales Rep or your Schrader TPMS distributor for pricing and availability. Product displayed for reference only, service kits might be available Click here to order
OE Ref.: 42607-33011
Commercial Name: Pacific Clamp-in Gen2 315MHz Toyota FSK
EZ-sensor® coverage: YES
Nut Torque: 35.4 in-lbs (4 Nm) Nm
Screw Torque: 35.4 in-lbs (4 Nm) Nm
Valve Core Torque: 3.5 in-lbs (0.4 Nm) Nm
Note:  
 
  WARNING: This product contains chemicals including lead, which is known to the State of California to cause cancer and reproductive issues.
For more information, go to www.P65Warnings.ca.gov.

EZ-sensor® GO is pre-programmed for all vehicles mentioned in the list. No programming is required before installation for the below applications. Additionally, the sensor can be programmed to 99% of all vehicle makes, models and years.

Click on item for more details:

This list is being continuously updated.

Part No.: 20031
Commercial Name: TPMS Service Pack
Note:

Contents: 1 Aluminum Nut, 1 Plastic Sealing Cap, 1 Rubber Grommet, 1 Nickel Plated Valve Core, 1 Aluminum Washer

99.99 € */each
Product displayed for reference only, service kits might be available Click here to order
Part No.: 20032
Commercial Name: TPMS Service Pack
Note:

Contents: 1 Aluminum Nut, 1 Plastic Sealing Cap, 1 Rubber Grommet, 1 Nickel Plated Valve Core, 1 Aluminum Washer

99.99 € */each
Product displayed for reference only, service kits might be available Click here to order
Relearn Summary:  OBD Relearn
Relearn Description

NOTE: Not all Models came equipped with a TPMS reset button. 
If no button is found, then a relearn is not required following an air pressure adjustment, tire rotation, or tire replacement. 
This button is commonly located on the driver’s side knee bolster, inside the glove compartment, under the steering wheel, or next to the DLC/OBDII. 
The purpose of this button is to set a base-line for the air pressure and re-establish communication between the sensors and the vehicle. 
Initialization following rotation and tire replacement: 
1. Inflate all tires to pressure listed on tire placard. 
2. Turn ignition to ON/RUN position (engine off).
3. Hold down tire pressure reset button (located on instrument panel, knee bolster, or inside glove box) until TPMS telltale flashed 3 times. 
4. Initialization will be completed when ECU has received signals from all sensors. Process may take 2-3 minutes. 
5. If initialization is not complete, drive vehicle for approximately 20 minutes. 

Initialization following new sensor installation: 
1. A properly formatted scan tool is required to learn new sensor IDs when replacing sensors. After IDs have been registered via the OBD, leave ignition on, and activate all sensors using TPMS activation tool. 
TIA troubleshooting tip: Many Toyota SUV’s and Minivans have a Main / 2nd Switch commonly located inside or under the glove box, or at the base of the knee bolster. 
(See image below) This switch allows the vehicle to store two sets of TPMS ID’s. One set for Spring / Summer wheels / tires and a second set for Fall / Winter. 
When the button is not pressed, the system is monitoring the OEM or “main” IDs on the vehicle. 
When pressed, the vehicle can then monitor a second set of IDs that can be stored for winter wheels/tires. 
If the button is pressed and no IDs are entered under the second position, then the MIL will illuminate.
So ensure the you are writing the sensor IDs to the correct postion.

Relearn Procedure as PDF document
Mounting Instructions
Note:
Sensor images shown in this document are for illustration purpose only!
Phisical sensor body may be different.
Non contractual document!
For tecnical information, please contact your supplier or leave a message at info@Schrader TPMS E-Catalog.com
User Manual/Quick Start Guide
Note:
Document contains full description user manual and / or Quick Start Guide. Non contractual document!
For technical information, please contact your supplier or leave a message at SchraderNA@sensata.com
Approvals and Declarations
Note:
Package contains FCC, IC and CE certifications
Physical sensor body may be different.
Other documents can be also found here.

Aftermarket Sensor

Part No.  
29079
29079
  Schrader Clamp-in Gen Delta 315MHz Toyota

Part No.: 29079
Commercial Name: Schrader Clamp-in Gen Delta 315MHz Toyota
OEM Sensor P/N: 42607-0C010; 42607-0C020; 42607-30030; 42607-35010; 42607-75010; 42607-AD020; 42607-33011; 88974915; 42607-06011; 42607-02010; 42607-34020; 42607-33021; 42607-04010; 42607-AD010; 42607-0E011
EZ-sensor® coverage: YES
Nut Torque: 71 in-lbs (8 Nm) Nm
Screw Torque: -- Nm
Valve Core Torque: 3.5 in-lbs (0.4 Nm) Nm
Note:  
 
  WARNING: This product contains chemicals including lead, which is known to the State of California to cause cancer and reproductive issues.
For more information, go to www.P65Warnings.ca.gov.

EZ-sensor® GO is pre-programmed for all vehicles mentioned in the list. No programming is required before installation for the below applications. Additionally, the sensor can be programmed to 99% of all vehicle makes, models and years.

Click on item for more details:

This list is being continuously updated.

Part No.: 20049
Commercial Name: TPMS Service Pack - Schrader Adjustable Angle Aluminum Valve Kit - Mercedes
Note:

20049 replaces 20047

99.99 € */each
Product displayed for reference only, service kits might be available Click here to order

EZ-sensor® GO can be programmed to any Make Model and Year shown in this list.

Click on item for more details:

This list is being continuously updated.

Relearn Summary:  
Relearn Description
Relearn Procedure as PDF document
Mounting Instructions
Note:
Sensor images shown in this document are for illustration purpose only!
Phisical sensor body may be different.
Non contractual document!
For tecnical information, please contact your supplier or leave a message at info@Schrader TPMS E-Catalog.com
User Manual/Quick Start Guide
Note:
Document contains full description user manual and / or Quick Start Guide. Non contractual document!
For technical information, please contact your supplier or leave a message at SchraderNA@sensata.com
Approvals and Declarations
Note:
Package contains FCC, IC and CE certifications
Physical sensor body may be different.
Other documents can be also found here.

Alternative Sensor

Part No.  
29079
29079
  Schrader Clamp-in Gen Delta 315MHz Toyota

Part No.: 29079
Commercial Name: Schrader Clamp-in Gen Delta 315MHz Toyota
OEM Sensor P/N: 42607-0C010; 42607-0C020; 42607-30030; 42607-35010; 42607-75010; 42607-AD020; 42607-33011; 88974915; 42607-06011; 42607-02010; 42607-34020; 42607-33021; 42607-04010; 42607-AD010; 42607-0E011
EZ-sensor® coverage: YES
Nut Torque: 71 in-lbs (8 Nm) Nm
Screw Torque: -- Nm
Valve Core Torque: 3.5 in-lbs (0.4 Nm) Nm
Note:  
 
  WARNING: This product contains chemicals including lead, which is known to the State of California to cause cancer and reproductive issues.
For more information, go to www.P65Warnings.ca.gov.

EZ-sensor® GO is pre-programmed for all vehicles mentioned in the list. No programming is required before installation for the below applications. Additionally, the sensor can be programmed to 99% of all vehicle makes, models and years.

Click on item for more details:

This list is being continuously updated.

Part No.: 20049
Commercial Name: TPMS Service Pack - Schrader Adjustable Angle Aluminum Valve Kit - Mercedes
Note:

20049 replaces 20047

99.99 € */each
Product displayed for reference only, service kits might be available Click here to order

EZ-sensor® GO can be programmed to any Make Model and Year shown in this list.

Click on item for more details:

This list is being continuously updated.

Relearn Summary:  
Relearn Description
Relearn Procedure as PDF document
Mounting Instructions
Note:
Sensor images shown in this document are for illustration purpose only!
Phisical sensor body may be different.
Non contractual document!
For tecnical information, please contact your supplier or leave a message at info@Schrader TPMS E-Catalog.com
User Manual/Quick Start Guide
Note:
Document contains full description user manual and / or Quick Start Guide. Non contractual document!
For technical information, please contact your supplier or leave a message at SchraderNA@sensata.com
Approvals and Declarations
Note:
Package contains FCC, IC and CE certifications
Physical sensor body may be different.
Other documents can be also found here.

Service Kits

Part No.  
20031
20031
  TPMS Service Pack

Part No.: 20031
Commercial Name: TPMS Service Pack
Note:

Contents: 1 Aluminum Nut, 1 Plastic Sealing Cap, 1 Rubber Grommet, 1 Nickel Plated Valve Core, 1 Aluminum Washer

 
 
  WARNING: This product contains chemicals including lead, which is known to the State of California to cause cancer and reproductive issues.
For more information, go to www.P65Warnings.ca.gov.

EZ-sensor® GO is pre-programmed for all vehicles mentioned in the list. No programming is required before installation for the below applications. Additionally, the sensor can be programmed to 99% of all vehicle makes, models and years.

Click on item for more details:

This list is being continuously updated.

EZ-sensor® GO can be programmed to any Make Model and Year shown in this list.

Click on item for more details:

This list is being continuously updated.

Relearn Summary:  
Relearn Description
Relearn Procedure as PDF document
Mounting Instructions
Note:
Sensor images shown in this document are for illustration purpose only!
Phisical sensor body may be different.
Non contractual document!
For tecnical information, please contact your supplier or leave a message at info@Schrader TPMS E-Catalog.com
User Manual/Quick Start Guide
Note:
Document contains full description user manual and / or Quick Start Guide. Non contractual document!
For technical information, please contact your supplier or leave a message at SchraderNA@sensata.com
Approvals and Declarations
Note:
Package contains FCC, IC and CE certifications
Physical sensor body may be different.
Other documents can be also found here.

Part No.  
20032
20032
  TPMS Service Pack

Part No.: 20032
Commercial Name: TPMS Service Pack
Note:

Contents: 1 Aluminum Nut, 1 Plastic Sealing Cap, 1 Rubber Grommet, 1 Nickel Plated Valve Core, 1 Aluminum Washer

 
 
  WARNING: This product contains chemicals including lead, which is known to the State of California to cause cancer and reproductive issues.
For more information, go to www.P65Warnings.ca.gov.

EZ-sensor® GO is pre-programmed for all vehicles mentioned in the list. No programming is required before installation for the below applications. Additionally, the sensor can be programmed to 99% of all vehicle makes, models and years.

Click on item for more details:

This list is being continuously updated.

EZ-sensor® GO can be programmed to any Make Model and Year shown in this list.

Click on item for more details:

This list is being continuously updated.

Relearn Summary:  
Relearn Description
Relearn Procedure as PDF document
Mounting Instructions
Note:
Sensor images shown in this document are for illustration purpose only!
Phisical sensor body may be different.
Non contractual document!
For tecnical information, please contact your supplier or leave a message at info@Schrader TPMS E-Catalog.com
User Manual/Quick Start Guide
Note:
Document contains full description user manual and / or Quick Start Guide. Non contractual document!
For technical information, please contact your supplier or leave a message at SchraderNA@sensata.com
Approvals and Declarations
Note:
Package contains FCC, IC and CE certifications
Physical sensor body may be different.
Other documents can be also found here.

Programmable Sensor

Part No.  
33500
33500
  Schrader Snap-in Programmable EZ-Sensor 314.9 MHz / 315Mhz / 433MHz

Part No.: 33500
Commercial Name: Schrader Snap-in Programmable EZ-Sensor 314.9 MHz / 315Mhz / 433MHz
OEM Sensor P/N:
Ean Code: 651001215971
Nut Torque: -- Nm
Screw Torque: 11.5 in-lbs (1.3 Nm) Nm
Valve Core Torque: 3.5 in-lbs (0.4 Nm) Nm
Note:

EZ-sensor must be programmed prior to installation and relearned to the vehicle. A Programming Tool compatible with EZ-sensor is required. For maximum coverage, ensure your TPMS tool is updated to the latest software available.

(A)=45.4 mm; (B)=Type 3

 

NOTE : the transmission frequency of 315 MHz is not admissible in the EU

 
 
  WARNING: This product contains chemicals including lead, which is known to the State of California to cause cancer and reproductive issues.
For more information, go to www.P65Warnings.ca.gov.

EZ-sensor® GO is pre-programmed for all vehicles mentioned in the list. No programming is required before installation for the below applications. Additionally, the sensor can be programmed to 99% of all vehicle makes, models and years.

Click on item for more details:

This list is being continuously updated.

Part No.: 20018
Commercial Name: EZ-sensor Service Pack - Rubber Valve Assembly
Note:

20018 replaces 20008

Contents: 1 Rubber Valve Stem assembled with Plastic sealing cap and Valve Core, 1 Stainless Steel Attachment Screw,

99.99 € */each
Product displayed for reference only, service kits might be available Click here to order
Part No.: 34000
Commercial Name: Schrader Service Pack - Aluminum Valve
Note:

Contents: 1 Aluminum Valve Stem, 1 Aluminum Nut, 1 Rubber Grommet, 1 Plastic Sealing Cap, 1 Nickel Plated Valve Core, 1 Stainless Steel Attachment Screw

99.99 € */each
Product displayed for reference only, service kits might be available Click here to order
Part No.: 34010
Commercial Name: Schrader Service Kit - Black Anodized Aluminum Valve
Note:

Contents: 1 Black Anodized Aluminum Valve Stem, 1 Black Anodized Aluminum Nut, 1 Rubber Grommet, 1 Black Plastic Sealing Cap, 1 Nickel Plated Valve Core, 1 Stainless Steel Attachment Screw

99.99 € */each
Product displayed for reference only, service kits might be available Click here to order

EZ-sensor® GO can be programmed to any Make Model and Year shown in this list.

Click on item for more details:

This list is being continuously updated.

Relearn Summary:  
Relearn Description
Relearn Procedure as PDF document
Mounting Instructions
Note:
Sensor images shown in this document are for illustration purpose only!
Phisical sensor body may be different.
Non contractual document!
For tecnical information, please contact your supplier or leave a message at info@Schrader TPMS E-Catalog.com
User Manual/Quick Start Guide
Note:
Document contains full description user manual and / or Quick Start Guide. Non contractual document!
For technical information, please contact your supplier or leave a message at SchraderNA@sensata.com
Approvals and Declarations
Note:
Package contains FCC, IC and CE certifications
Physical sensor body may be different.
Other documents can be also found here.

Part No.  
33700
33700
  Schrader Clamp-in Programmable EZ-sensor 314.9 MHz / 315Mhz / 433MHz

Part No.: 33700
Commercial Name: Schrader Clamp-in Programmable EZ-sensor 314.9 MHz / 315Mhz / 433MHz
OEM Sensor P/N:
Ean Code: 5054208007083
Nut Torque: 71 in-lbs (8 Nm) Nm
Screw Torque: -- Nm
Valve Core Torque: 3.5 in-lbs (0.4 Nm) Nm
Note:

EZ-sensor must be programmed prior to installation and relearned to the vehicle. A Programming Tool compatible with EZ-sensor is required. For maximum coverage, ensure your TPMS tool is updated to the latest software available.

 

NOTE : the transmission frequency of 315 MHz is not admissible in the EU

 
 
  WARNING: This product contains chemicals including lead, which is known to the State of California to cause cancer and reproductive issues.
For more information, go to www.P65Warnings.ca.gov.

EZ-sensor® GO is pre-programmed for all vehicles mentioned in the list. No programming is required before installation for the below applications. Additionally, the sensor can be programmed to 99% of all vehicle makes, models and years.

Click on item for more details:

This list is being continuously updated.

Part No.: 20049
Commercial Name: TPMS Service Pack - Schrader Adjustable Angle Aluminum Valve Kit - Mercedes
Note:

20049 replaces 20047

99.99 € */each
Product displayed for reference only, service kits might be available Click here to order

EZ-sensor® GO can be programmed to any Make Model and Year shown in this list.

Click on item for more details:

This list is being continuously updated.

Relearn Summary:  
Relearn Description
Relearn Procedure as PDF document
Mounting Instructions
Note:
Sensor images shown in this document are for illustration purpose only!
Phisical sensor body may be different.
Non contractual document!
For tecnical information, please contact your supplier or leave a message at info@Schrader TPMS E-Catalog.com
User Manual/Quick Start Guide
Note:
Document contains full description user manual and / or Quick Start Guide. Non contractual document!
For technical information, please contact your supplier or leave a message at SchraderNA@sensata.com
Approvals and Declarations
Note:
Package contains FCC, IC and CE certifications
Physical sensor body may be different.
Other documents can be also found here.